NuForce’s Icon iDo amp improves iPod sound, costs more than a Classic

Ever feel the temptation to run your iDevice straight into a set of 250-ohm Beyerdynamic or Sennheiser cans? You could , but the resulting sound would hardly rock you. Thankfully, NuForce’s colorful Icon iDo is ready to assist in your iAudiophile needs for only $250. This headphone amp — supporting sampling rates up to 48kHz, 24-bits of resolution and a 10-20kHz frequency — cables into your iPod’s 30-pin connector to bypass the digital audio converter and uses its own to amp up the quality of your audio. The iDo promises to drive headphones all the way up to 300-ohms with 12mW of power via its 3.5 jack, and it’s also sporting digital / analog RCAs if you want to share the love with some speakers. You’ll be at the whim of wall outlets as plug-in power is required for operation, but at least its built IR receiver will let you remote control your playlists from afar. It’s available today if you’re finding your HiFi bugged piqued, and a backside shot with PR is just past the break. Continue reading NuForce’s Icon iDo amp improves iPod sound, costs more than a Classic NuForce’s Icon iDo amp improves iPod sound, costs more than a Classic originally appeared on Engadget on Thu, 08 Sep 2011 09:00:00 EDT. Please see our terms for use of feeds . Permalink

Posted by on September 8, 2011. Filed under News, Tech. You can follow any responses to this entry through the RSS 2.0. You can skip to the end and leave a response. Pinging is currently not allowed.